Loading ...
Loading ...
Loading ...
12
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The coffeemaker
is beeping
Filter door is not closed • Check to be sure that all components of the filter compartment are in place
• Close filter door (you will hear a click if the door is properly shut)
Filter basket is not in
place
• Open filter door by pressing the filter door release button
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
Coffee grounds and filter
from previous use are
still in filter basket
• Remove filter and used coffee grounds
• Add new filter
The brew cycle
will not start
There is no water in the
water reservoir
• Fill the water reservoir using the water level markings
Coffee is weaker
than usual
There are not enough
beans in the hopper
• Be sure there are enough beans in your hopper for the amount of coffee you
intend to brew
Strength setting
is incorrect
• Check your strength setting — displayed on the LCD screen
• To change your strength setting, press the Strength Control button
The coffeemaker
is not grinding
beans
The hopper may be
too full
• Turn the coffeemaker off and unplug
• Remove some of the beans from the hopper
EMPTY
appears in LCD
display
Coffee grounds and filter
from previous use are
still in filter basket
• Remove filter and used coffee grounds
• Add new filter
CLEAN is flashing
on the LCD when
the unit is turned
on
Coffeemaker needs to
be decalcified
• Run a clean cycle – follow the decalcification directions on page 11 of
Instruction Booklet
The coffeemaker
will not enter
CLEAN mode
The water reservoir is
empty
• Fill the water reservoir with decalcification mixture before turning the
coffeemaker on. Follow the decalcification directions on page 11 of
Instruction Booklet
Loading ...
Loading ...
Loading ...