Loading ...
Loading ...
Loading ...
14
USE AND CARE
USING THE OVEN FOR THE FIRST TIME
Operate as follows:
■ Assemble the wire racks on the oven
walls using the 2 screws interposing
the catalytic panels “A” with the arrow
up (g. 9a). The catalytic panel with the
hole for the side oven lamp must be
positioned on the left oven wall. DO NOT
INTERPOSE THE CATALYTIC PANEL
WITHOUT THE HOLE ON THE LEFT
OVEN WALL.
■ Slide in the grease lter on the back of
the oven as in g. 10.
■ Slide into the guides, the shelf and the
tray (g. 9b).
The rack must be tted so that the safety
notch, which stops it sliding out, faces
the inside of the oven; the guard rail shall
be at the back.
The tray must be tted so that the safety
notch, which stops it sliding out, faces
the inside of the oven.
■ To eliminate traces of grease in
manufacture it is necessary to preheat
the oven at the maximum temperature:
• For 60 minutes in the position, for
30 minutes in the
position and for
another 15 minutes in the
position.
■ Unscrew the xing screws and slide off
the wire racks and the catalytic liners to
the oven wall as in g. 9a.
■ Let the oven cool down, switch off the
electrical supply, then clean the inside of
the oven with a cloth soaked in water and
neutral detergent and dry thoroughly.
CAUTION:
■ This appliance must be used only for the task it has explicitly been designed for, that
is for domestic cooking of foodstuffs. Any other form of usage is to be considered as
inappropriate and therefore dangerous.
■ Do NOT place combustible materials or products on this appliance at any time.
A
A
Figure 9a
Figure 9b
Stop notch
Stop notch
Guard rail
Loading ...
Loading ...
Loading ...