Loading ...
Loading ...
Loading ...
About the controls on the refrigerator.
6
Locking the Dispenser
Press the Lock Controls pad for 3 seconds to lock
the dispenser and control panel. To unlock, press
and hold the key pads again for 3 seconds.
Using the Dispenser (on some models)
Select or
Press the glass gently against the top of the dispenser
cradle.
Dispenser Light
This pad turns the light in the dispenser on and
off. The light also comes on when the dispenser
cradle is pressed. If this light burns out, it should be
replaced with a 6 watt maximum, 12 volt DC bulb.
Water Filter Replacement Indicator
The light on this button will illuminate when the water filter
needs to be changed. After the filter has been changed,
press and hold for 3 seconds to turn the light off. For more
details, see “About the Water Filter Catridge” section.
Freezer Refrigerator
Not all features are on all models. Your controls may be similar to the following:
The temperature controls are preset in the factory at 37°F
for the refrigerator compartment and 0°F for the freezer
compartment. Allow 24 hours for the temperature to
stabilize to the preset recommended settings.
The temperature controls can display both the SET
temperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary
slightly from the SET temperature based on usage and
operating environment.
The temperature controls are preset in the factory at “5”
for the refrigerator compartment and “5” for the freezer
compartment. Allow 24 hours for the temperature to
stabilize to the preset recommended settings.
NOTE: Display settings are “1” warmest, “9” coldest, and
“0” off.
Loading ...
Loading ...
Loading ...