Loading ...
Loading ...
Loading ...
Basic operation en
9
Not microwave-safe
Cookware and accessor-
ies
Reason
Metal cookware Metal does not allow mi-
crowaves to pass
through. The food hardly
heats up.
Cookware with gold or sil-
ver decoration
Microwaves can damage
gold and silver decora-
tion.
Tip:You can only use this
kind of cookware if the
manufacturer guarantees
that it is microwave-safe.
7.3 Testing cookware for microwave
suitability
Test cookware to see whether it is suitable for mi-
crowave use. Testing cookware is the only time the ap-
pliance should be operated in microwave mode without
any food inside.
WARNING‒Risk of scalding!
The accessible parts of the appliance become hot dur-
ing operation.
▶ Never touch these hot parts.
▶ Keep children at a safe distance.
1.
Place the empty cookware in the cooking compart-
ment.
2.
Set the appliance to the maximum microwave power
setting for 30 seconds to 1 minute.
3.
Start the operation.
4.
Check the cookware several times:
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
7.4 Configuring the microwave settings
WARNING‒Risk of scalding!
There is a possibility of delayed boiling when a liquid is
heated. This means that the liquid reaches boiling tem-
perature without the usual steam bubbles rising to the
surface. Even if the container only vibrates a little, the
hot liquid may suddenly boil over and spatter.
▶ Always place a spoon in the container when heating
liquids. This will prevent delayed boiling.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶ Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
Tip:To ensure optimum use of your appliance, you can
refer to the information in the recommended settings.
→"How it works", Page12
1.
Follow the safety instructions. →Page3
2.
Observe the information on how to prevent material
damage. →Page5
3.
Read the information on microwave-safe cookware
and accessories. →Page8
4.
Use the function selector to set the required mi-
crowave power setting.
5.
Use the time switch to set the required cooking
time.
a An audible signal sounds once the cooking time
has elapsed.
Note:If you open the cooking compartment door while
the appliance is in operation, the appliance stops the
operation and keeps the set time schedule. When you
close the cooking compartment door, the appliance
continues to operate as before.
Changing the cooking time
You can change the cooking time at any time.
▶
Use the time switch to set the required cooking
time.
Stopping operation
▶
Set the time selector to 0.
Loading ...
Loading ...
Loading ...