Loading ...
Loading ...
Loading ...
–13–
Note: As the doo
r gets pressed in during shipping, aer reversing
the door, the gasket may have to be reset. This is done to prevent
the cool refrigerated air from escaping. If there is a gap between
the door gasket and the cabinet, set the gasket by gently pulling
it out to seal the gap.
DOOR ALIGNMENT
1. Remove the top hinge cover by using a flathead screwdriver.
Place the head under the front edge of the cap and gently li.
2. Loosen the top hinge screws using a Phillips head screw
driver.
3. Adjust the door or put a spacer in between and tighten the
screws.
4. Replace the top hinge cover by aligning the rear of the cover
with the rear of the hinge. Press firmly on the front of the cov-
er until it snaps in place.
ELECTRICAL REQUIREMENT: IMPORTANT GROUND INSTRUCTIONS
I WARNING I
Improper use of grounding can result in electric shock and injury.
• Make sure there is a suitable power outlet (115 volts, 15 amps
outlet) with proper grounding to power the refrigerator.
• Avoid the use of three prong adapters or cutting o the third
grounding prong in order to accomm
odate a two prong out-
let. This is a dangerous practice since it provides no eective
grounding for the refrigerator and may result in shock hazard.
ENGLISHESPAÑOLFRANÇAIS
Loading ...
Loading ...
Loading ...