Loading ...
Loading ...
Ring Light can be controlled using either the onboard buttons, or via Wi-Fi from a PC, Mac,
Android or iOS device.
If your PC or Mac is not equipped with Wi-Fi, use the Elgato Control Center app on your iOS or
Android device to add Ring Light.
A Wi-Fi connection is only needed for initial pairing. Once paired, you can control Ring Light via
any wired or wireless device in your network.
Switch on your Ring Light. It will take
approximately 10 seconds to boot up.
Launch Control Center and pair Ring Light by
clicking the + icon.
Use Control Center to switch Ring Light on/
off, adjust brightness, and ne-tune color
temperature.
Power on Ring Light. Push and hold
the RESET button for at least 10
seconds until the light ashes 3x.
CONTROLLING RING LIGHT
4
2
3
PC/Mac setup
1
Download and install the Elgato Control
Center software - elgato.com/download
Resetting your Ring Light
3/5 | Version 01 | December 15 2020
Compatible with:
Loading ...
Loading ...