Loading ...
Loading ...
Loading ...
FILL IN DATES
Check Brake OperaUon
Check Tire Pressure _ _
Check Operator Presence and
T ROS Systems I_
R check for Loose Fasteners I_ 1_6 V'
Sharpen/Replace Mower Blades i_
T Lubrication Chart I# /
i O CheckBatteryLeval
Clean Battery and Terminals I_
Check Transaxle Cooling I_
Check V-Baits I_
Check Engine Oil Level t_ tk#w
Change Engine Oil (with oil filter) I_1.=
E Change Engine 011(without oil filter) I#/_._ V #
N CteanAirR,ter _;
G Clean Air Screen
N_ Muffler/Spark Arrester IV#'
Inspect
E Reptace Oil Filter (If equlpeed) _.2
Clean Engine Cooling Fins V#2
Replace Spark Rug _2
Replace Air Filter Paper Cartndge
Replace Fuel Filter
1 - Change more often when operating Lmdera heavy load or
in high ambient temperatures.
2 - Se_vlae more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot boll to S5 ft.-Ibe, maximum.
Do not overlighten,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
LUBRICATION CHART
SF Spindle
Zerk Zerk
(_Front Wheel
Bearing Bearing Zerk
Zerk
"(DGearshift
; Pivots
• SAE 30 or 10w30 MotorOil
(_Genera] Purpose Grease
(_Refer to Maintenance "ENGINE" Section
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
17
Loading ...
Loading ...
Loading ...