Loading ...
Loading ...
Loading ...
EN
25
Operation
www.bora.com
6 Operation
Observe all safety and warning information during
operation (see the Safety section).
INFO The cooktop may only be operated when
the stainless steel grease filter of the
cooktop extractor is installed (see operating
instructions for cooktop extractor).
INFO Clean the cooking zone before using the
cooktop for the first time (see the Cleaning
section).
6.1 General operating instructions
The cooktop is controlled using the control knobs.
Each cooking zone has its own control knob. The front
cooking zone is controlled using the left-hand knob and
the back cooking zone with the right-hand knob.
There are 9 power levels, one power setting and various
functions available for each cooking zone.
t
P
9
8
7
6
5
4
3
2
1
v
0
Fig. 6.1 Knob ring assignment
Knob ring position Function
0
Switching off
v
Heat retention level
1 - 9
Power levels
P
Power setting
t
Timer function
Tab. 6.1 Knob ring positions
6.2 Operating the cooktop
6.2.1 Switching on the cooking zone
Fig. 6.2 Switching on the cooking zone
Turn the knob ring from the 12 o-clock position to a
power level.
Adjusting the power level
Turn the knob ring to the desired power level.
The selected power level is activated and displayed.
6.2.2 Power setting
Switching on the power setting
INFO Both cooking zones are equipped with a
power-enhancing power setting.
If a cooking zone is operated at power setting
ßp
, the other
cooking zones can be operated at a maximum power level
of
5
.
If the power setting is increased from
5
, the power level is
switched down from
ßp
.
If the power level is set higher than
5
when power
setting
ßp
is activated for the other cooking zone, it is
automatically reduced to power level
5
after 3 seconds
(the control knob display flashes for 3 seconds).
If the power setting
ßp
is deactivated again within these
3 seconds, the second cooking zone can continue to be
operated at the higher power level.
Twist the knob ring to the 10 o’clock position.
ßp
is displayed and the power level is activated.
After 10 minutes, the cooking zone is automatically
switched back to power level
9
.
Switching the power setting off early
Turn the knob ring to the desired power level.
The power level set is active and is displayed.
Loading ...
Loading ...
Loading ...