Loading ...
Loading ...
Loading ...
EN
14
Device description
www.bora.com
Pay attention to the cookware bottom. The base of
the cookware should not show any sign of curvature.
Due to incorrect temperature monitoring of the hob
caused by the air gap between the cookware and the
temperature sensor underneath the hob, overheating
may occur. The bottom of the cookware must not have
any sharp grooves or sharp edges to avoid scratching
the cooktop.
Place the cookware (without a mat or similar) directly
onto the glass ceramic.
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the material
and the finish of the base:
Humming may occur when using a high power
level. It decreases or disappears if the power level is
decreased.
Crackling or whistling may occur due to the bases of
cookware made of different materials (e.g. sandwich
base).
Clicking sounds may occur during electronic switching
procedures especially at low power levels.
Whirring may occur when the cooling fan is switched
on. In order to increase the service life of the
electronic system, the cooktop is equipped with a
cooling fan. The cooling fan switches on automatically
if the cooktop is used intensively. You will hear a
whirring sound. The cooling fan may continue running
after the device has been switched off.
4.3.6 Pan size recognition
The cooking zone does not work if
...
v
,
is displayed.
... If it is switched on without cookware or with
unsuitable cookware.
... the base diameter of the cookware is too small;
... if the cookware is removed from a switched on
cooking zone.
... after 10 minutes if no pan is detected. The cooking
zone then switches off automatically and can only
be switched back on after the control knob has been
turned back to the zero position.
Power level Cooking duration in min:sec
1
0:40
2
01:00
3
02:00
4
03:00
5
04:20
6
07:00
7
02:00
8
03:00
Tab. 4.3 Overview of the automatic heat up function
4.3.4 Heat retention levels
The heat retention level keeps cooked foods warm.
v
appears in the control knob display.
The maximum duration for the warming function is
limited to 8 hours.
There are three different heat retention levels.
Heat retention level Symbol Temperature
1
,
42° C
2
;
74° C
3
*
94° C
Tab. 4.4 Heat retention levels
4.3.5 Suitable cookware
INFO The heating and heat through time for the base
of the cookware as well as the cooking results
are significantly influenced by the structure and
material of the cookware.
Cookware with this symbol is suitable for
induction cooktops. The cookware used for
the induction cooktop must be made of metal,
feature magnetic properties and possess a
sufficient bottom surface.
Suitable cookware is made of:
stainless steel with a magnetisable base
enamelled steel
cast iron
Cooking zone Minimum diameter
PKI11 front back 120 mm
90 mm
Tab. 4.5 Minimum cookware diameter
Perform a magnet test, if necessary. If a magnet sticks
to the base of the utensils, they are normally induction
compatible.
Loading ...
Loading ...
Loading ...