Loading ...
Loading ...
Loading ...
OPERATION
ProtectingtheCooktop
• DO NOT slide cookwareacross
your cooktop.
• DO NOT use a dishtowelor sponge
to clean or wipe your cooktop.
• DO NOT use scouringpowdersor
plastic, nylon,or metalcleaning
pads on your cooktop.
• DONOT apply your cooktop
cleaning cremeto the cooktop
surface if the surface is hot.
• READthe instructionlabelon the
cooktop cleaning cremebottle
before attemptingto clean the
surface of your cooktop.
• AFTER cleaning the cooktop
surface,be sure to wipe off any
residuethat may be leftfromthe
cremewith a dry papertowel.
• FORMAJORspills, turn the surface
control knobto OFF.Usea dry
paper towelto wipe up spill,then
use a razor scraper (heldwitha
potholder)at a 45° angleagainst
the surface of the cooktop to
scrape remainingspill from the
hot cooking zone.
• DONOT cook directlyon the
surface of the glass.
• DO NOTusethecooktopasa
cutting board.
_ AUTION: When
the surface controls
are turned off, the
Hot Surface Indicator light
will remain lit until the
cooktop surface has cooled
to approximately 150°F.
The glass ceramic surface
will retain heat after the
indicator light goes out.
Use caution until the cooktop
surface has had time to cool.
J
Sugarspills (suchas jellies,fudge,
candy syrups) or meltedplastic can
cause pitting of the cooktop surface
unlessthe spill is removedwhile it is
still hot.Special care should be taken
when removinghot substances.
Followtheseinstructionscarefully and
removesoil while spill is hot.
1. Turnoff all surface units. Remove
hot pans.
2. Wearingan oven mitt:
a. Usethe razorscraper to move
the spill to a cool area onthe
cooktop.
b, Removethe spill withpaper
towels.
3. Any remaining spillover should be
left until the surface of the cooktop
has cooled.
4. Don't usethe surface unitsagain
until all of the residuehas been
completelyremoved.
NOTE: Ifpitting or indentationinthe
glass surface has already occurred,
the cooktop glasswill haveto be
replaced. In this case, servicewill be
necessary.
5
20P2562 ENv01
Loading ...
Loading ...
Loading ...