Loading ...
Loading ...
Loading ...
QUICK START GUIDE
u-line.com
6
Water Hookup
PREPARE PLUMBING
The water valve uses a standard 1/4” (6.35 mm)
Plumbing installation must observe all state
and local codes. All water and drain connections
MUST BE made by a licensed/qualied plumbing
contractor. Failure to follow recommendations
and instructions may result in damage and/or
harm.
Water Supply Connection
•
• The water pressure should be between 20 and 120 psi
•
•
•
softer ice than desired.
•
• The water line should be looped into 2 coils. This
Do not use any plastic water supply line. The line
is under pressure at all times. Plastic may crack
or rupture with age and cause damage to your
home.
Do not use tape or joint compound when
attaching a braided exible water supply line
that includes a rubber gasket. The gasket
provides an adequate seal – other materials
could cause blockage of the valve.
Failure to follow recommendations and
instructions may result in damage and/or harm,
ooding or void the product warranty.
Use new hose set. Do not reuse old hose set.
Turn o water supply and disconnect electrical
supply to unit prior to installation.
Use caution when handling back panel. The edges
could be sharp.
CAUTION
!
CAUTION
!
CAUTION
!
Loading ...
Loading ...
Loading ...