Loading ...
Loading ...
Loading ...
8
VQT4U56
Connections
1 Connect the DAB indoor antenna (supplied) to the
speaker unit.
2 Connect the AC mains lead after all other
connections are completed.
≥ After connecting the AC mains lead to the mains socket, wait
for more than 15 seconds to turn on the Standby/on switch.
≥ When this system is turned on, the CD unit and the speaker
unit are connected wirelessly.
≥ When this system is turned on for the first time after
purchase, a message prompting you to connect a Bluetooth
®
device (“PAIRING”) is displayed. (l 16)
≥ This system consumes a small amount of AC power (l 30)
even when turned off.
≥ In the interest of power conservation, if you will not be using
this system for an extended period of time, unplug it from the
household mains socket.
≥ These speakers do not have magnetic shielding. Do not
place them near a television, personal computer or other
devices easily influenced by magnetism.
≥ Tape the antenna to a wall or column in a position with the
least amount of interference. (Use a DAB outdoor antenna if
radio reception is poor.)
1 Plug the audio cable (not supplied) into the AUX
jack.
Plug type: ‰3.5 mm stereo
2 Press [ , AUX] to select “AUX” and start playback
on the connected device.
To select the sound input level of the
external device
1 While in AUX mode, press [PLAY MENU] to select
“INPUT LEVEL” and then press [OK].
2 Press [3, 4] to select “NORMAL” or “HIGH”.
≥ The default setting is “NORMAL”.
≥ Switch the equalizer off or turn the volume of the external
device down to reduce the input signal. High level of input
signal will distort the sound.
≥ For details, refer to the instruction manual of the other
equipment.
≥ The cables and the devices are not supplied.
If the CD unit and the speaker unit are not wirelessly
connected, or the output sound is interrupted, connect
the both units with two audio cables (plug type:
‰3.5 mm stereo, not supplied) as illustrated below.
≥ We recommend you use cables of less than 5 m.
≥ If the cables are connected, the displays show
“WIRED MODE” and this system starts wired
communication. This system automatically connects
wirelessly when the cables are disconnected.
Basic connection
[For]the]United]Kingdom[and[Ireland]
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 3 BEFORE CONNECTION.
Adhesive tape (not supplied)
DAB indoor antenna
(supplied)
Be sure to tighten the
nut securely.
To a household
mains socket
AC mains lead
(supplied)
Connect an external music device
(for AUX mode)
Connect the CD unit and the
speaker unit with cables (optional)
Audio cable
(not supplied)
Audio cable (not supplied)
SC-NE5DB~VQT4U56.book 8 ページ ２０１３年１月２１日 月曜日 午後６時１８分
Loading ...
Loading ...
Loading ...