INSTALLATION:
5. Connect the ground wires
(bare copper or green) from
your fixture to the ground wire
(bare copper or green) or
ground screw in the electrical
box. Connect the black wire
from the fixture to the black
wire in the electrical box and
connect the white wire from
the fixture to the white wire in
the electrical box.
6. Once wire connections are
completed, carefully tuck wires
and wire nuts into the
electrical box making sure no
bare wire (on the black and
white) is visible at the wire
nuts.
7. Install the light fixture to
the ceiling by aligning the
holes in the fixture with the
studs on the mounting bracket.
Secure fixture in place with star
washers and cap nuts.
8. Remove spinner nut from
socket. Position guard and
glass on the fixture and secure
with spinner nut.
9. Install proper bulb type
and wattage (not included).
1. Screw the center rod to
the fixture.
2. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”.
3. Mount the mounting
bracket to electrical box using
electrical box screws (not
included). Make sure the studs
on the mounting bracket are
facing out from the electrical
box.
4. Adjusting the length of
flexible cord. For safety, do
not release the knot inside
canopy.
Canopy
Star
Washer
Cap
Nut
Fixture
PENDANT LIGHT
Tel: (613) 342-5424, Fax: (800) 263-4598
Stud
White
Black
House supply
Ground wire
Fixture
Ground wire
Bare Copper
Ground Wire
IPL744A01
09/18
“B”
Studs
Electrical Box Screws
(not included)
Electrical
Box
Mounting
Bracket
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
Pliers Wrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Wiring supplies
as required by
local electrical
code
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
Guard
Shade
Spinner
Nut
Bulb
Center
Rod
Fixture
Loading ...
