Loading ...
Loading ...
Loading ...
fiiEEZEllFE UflES
AUTOMATICICEMAKEfl
To avoid propertydamage, observe
the following:
:_ Be NOTforce ice maker arm
down or up....
>- 00 NOT place or store anythingin
ice storage bin,
This ice maker creates the ice used in
the dispensingsystem.
UsingIce Maker for the First Time
> Confirm ice bin is in _------------_._
place and ice maker
arm is down
> Afterfreezer section reaches
between0° to 2°F (-t8 ° to -17oC),
ice maker filfs with water and begins
operating,
> Allow approximately24 hours after
installationto receive first harvest of
ice°
>- Discard ice createdwithinfirst 12
hours ofoperation to verify system is
flushedof impurities.
Operating Instructions
>- Confirm ice bin is in place and ice
makerarm is down.
> After freezersection reaches0° to
2°F (-18° to -17° C), ice makerfills
with waterand begins operating.You
will have a complete harvest of ice
approximatelyevery 3 hours
> Stop iceproduction
by raising ice maker
arm until click is
heard.
> Ice makerwill remain inthe off
positionuntil arm ispusheddown.
IMPORTANT: IceCream Sheffshould
not be instafledif ice makerarm is in
"off" position
SHELVES
FREEZER SHELF
To remove and install _4t_ A
clip-mounted
shelves:
> Toremove, pull shelffrom wall
mountingclips and pull [eft side of
shelfout of walt mountingholes
>. Toinstall,placeshelfin mountinghole
andattach to wall mountingc?ips.
To remove and Jnsta?lrail-mounted
shelves:
> To remove,snap
right side of shelf
from cabinetrailing
and removefromwall mountingclips
To install, replaceshelf in wall
mountingclips Be sure backedge of
shelf is flushwith backof cabinetand
snap shelf into cabinetrailing
ICE CREAM SHELF
providesa space for
itemsto be chilled or -
frozen quickly
Toremove, lift ice creamshelf from
icebin rails and pull straight out.
_ Toinstall,fit shelf over top of ice
makerand lower onto ice bucket rails.
IMPORTANT: Ice CreamShelf should
not be installed if ice makerarm is in
"off"position.
To avoid possible injury, including
death, do not pIace glass items in ice
cream shelf. Glass objects may
shatter or explode if exposed to
extreme cold.
FREEZER BASKET
'Toremove and install
basket" __
=nil n=_llnnt In it_ fitll _t__n,_inn
Lift up front of basket and remove
> To install,slide basketinto railsat
bottomof freezersection..Lift up front
of basket,and slideto the backof
refrigerator
ICE STORAGE BIN
TheIce Storage
Bin is locatedbelow
the automatic
dispensingice
maker_
To remove and install ice storage bin:
;-- To removebin, removeice cream
shelf.
Raiseice maker arm to deactivateice
maker Lift front of bin and pull outto
itsfull extension. Lift upfront of bin
andremove
>- To install,slide bin intorails below ice
makeruntil bin locks intoplace. Drop
ice makerarm to activateice maker,
and replace ice creamshelf.
IMPORTANT: Ice bin must be lockedin
properplace lot r'_ _
proper ice
dispensing If
freezerdoor
does not close, bin isnot in proper
location.Turn auger driver
counterclockwise(as shown)to properly
alignice bin with back of refrigerator.
ADJUSTABLE DOOR
BUCKETS
Door Buckets adjustto meet individual
storageneeds,
To remove buckets:
>- Lift the door bucket up until
it clearsthe retainersonthe
door liner, then pull the
door bucket
straightout.
To reinstall buckets:
> Slide bucket in above desired door
liner retainer and push down until
bucket stops.
!'11
Z
r"
m
Z
17
Loading ...
Loading ...
Loading ...