Loading ...
Loading ...
Loading ...
2rid Rinse
A second rinse can be used to ensure the removal of detergent or
bleach residue from garments, This option provides an additional
rinse with the same water temperature as the first rinse.
Extended Spin
Use this option to add an additional spin to any cyc[e to improve
the "fluff" of your laundry, to reduce drying time, and to save
energy.
Mod ers
Preset cycle settings of Water Temperature, Wash/Rinse, and
Spin Speed can be changed. You can change a modifier after
starting a cycle anytime before the selected modifier begins.
MODIFIERS
AUTOTb_fPCONTROL
• EXTRAHOT/ COLD • EXTRAHIGH
• HOT/ COLD • H[GH
• WARM/ WARM • MEDIUM
• WARM / COLD • LOW
• COLD/ COLD • EXTRALOW
• TAP COLDI COLD • NO SPIN
(2) Q
WATERTEMP SPIN SPEED
WASH / RINSE
• HIGH
• Low
• OFF
Q
END of CYCLESIGNAL
• To change the water temperature, select the WATER TEM P
button untilthe desired setting glows.
• To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
Wash/Rinse Temp
Select a water temperature based onthe type of load you are
washing, Use the warmest water safe for fabrics. Foilow garment
label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
HOT Whites and pastels
122°F (50°C) or above Heavy soils
WARM Bright colors
104°F (40°C) Moderate to light soils
COLD Colors that bleed or fade
77°F (25°C) Lightsoils
In wash water temperatures colder than 70°F (21 °C), detergents
do not dissolve well. Softs may be difficult to remove.
Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned ON when a cycle is
selected. (See "Preset Cycle Settings" in "Cycles.")
• ATC ensures consistent cleaning.
• ATC works for the wash temperature with Extra Hot/Cold,
Hot/Cold, Warm/Warm, Warm/Cold, and Cold/Cold settings.
• The Cold rinsetemperatures depend on the cold water at
your faucet.
• For the Tap Cold/Cold setting, both wash and rinse
temperatures depend on the cold water at your faucet.
• The Warm dnse setting regulates the water temperature at
approximately 104°F (40°C).
• HEAVY
• NORMAL
• LIGHT
C)
SOIL LEVEL
• To change cycle time, select SOIL LEVEL button.
• To change the loudness of the End of Cycle Signal, select
END of CYCLE SIGNAL.
16
Loading ...
Loading ...
Loading ...