Loading ...
Loading ...
Loading ...
FT 44845 - 200504
16
www.KALORIK.com
• Clean the heating element inside the Smart Fryer with a cleaning
brush to remove any food residue.
Cleaning the smart fryer’s exterior:
• Wipe clean with a damp sponge or cloth. Wipe dry.
• NEVER use steel wool, metal scouring pads or abrasive cleaners, as
they may damage the finish.
• Do not let any liquids enter the air inlet on the top of the Smart Fryer.
Any other servicing should be performed by an authorized service
representative.
DO NOT IMMERSE THE FRYER IN WATER OR ANY OTHER LIQUID!
TROUBLESHOOTING
Problem
Possible cause
Solution
The Smart Fryer
does not work
The appliance is
not plugged in.
Put the main plug in an earthed wall
socket.
You have not set
the timer.
Adjust the setting to the required
preparation time to switch on the
appliance.
The basket holder
is not properly
locked.
Push the basket holder back in the Smart
Fryer properly.
The ingredients
fried with the
Smart Fryer are
not done.
There is too much
food in the basket.
Put smaller batches of ingredients in the
basket. Smaller batches are fried more
evenly.
The set
temperature is too
low.
Adjust the setting to the required
temperature setting (see section ‘Settings’)
The cooking time is
too short.
Adjust the setting to the required
preparation time (see section ‘Settings’)
Fried snacks
are not crispy
when they
come out of
the Smart Fryer.
You used a type of
snack meant to be
prepared in a
traditional deep
fryer.
Use snacks made to be prepared in the
oven, or lightly brush some oil onto the
snacks for a crispier result.
I cannot slide
the basket into
There is too much
food in the basket.
Do not fill the basket to capacity; refer to
the “Setting” table above for maximum
quantities.
Loading ...
Loading ...
Loading ...