Loading ...
Loading ...
Loading ...
• Please use the integrated coffee grinder for roasted and untreated beans only,
never for other foodstuffs! Please make sure there are no foreign substances
among the coffee beans – failing this warranty claims will become void.
• If a repair is necessary (including replacement of the power cable), please
rst contact the central telephone support or the retailer where you bought the
appliance – upon consultation and in accordance with item 9. of this manual
send the appliance to NIVONA Zentralkundendienst, Südwestpark 90, D-90449
Nürnberg
• If the appliance’s power cable is damaged, it must be replaced by the manufac-
turer, its customer service or a similarly qualied person to avoid danger.
Attention: Repairs to electrical appliances must only be undertaken by a pro-
fessional! Improper repairs may result in severe danger for the user! Should
the appliance be used or maintained improperly or incorrect, the warranty
shall become void!
Attention: Using the on/off switch (g.1/J) during the brewing process may
damage the appliance! Turn the appliance off only after it has nished the job.
Attention: Risk of burning! When drawing steam or hot water, a shot of hot
water may spray from the coffee spout. Allow the spout to cool down before
you touch it.
2. Initial start-up
2.1. Getting started
Unpack the appliance and all items belonging to it with care.
The following are included in the package:
• User Manual
• Warranty card
• Measuring spoon with assembly assistance for lter insert
• Two cleaning tabs
• One Claris lter
• One testing strip for water hardness
• One milk container incl. connecting tube (only model 788)
Note: In case of customer service being required, the appliance should be shipped in its original pack-
aging. Please keep this safe, including the polystyrene parts.
Place the appliance on a at, dry and suitable surface.
Plug the power cord into a professionally installed mains socket.
Your appliance has a power cord bay – if the cable is too long, place the excess length in the
power cord bay at the back (g. 1/T)
2.2. The most important controls
Your NIVONA appliance offers a speciality of options to brew coffee according to your individual
needs. The main controls and how to use them are identical for most of the coffee specialities.
• Left Rotary-Push-Turn-Switch (short: left rotary control) (g. 1/B): The left rotary control alters
strength and volume of your coffee. By turning the left rotary control in the main menu the vol-
ume is adjusted (in ml). By pressing the left rotary control in the main menu the coffee strength
is altered (bean symbol, g. 1/D). The more beans displayed, the stronger the coffee. By pushing
the left rotary control in any sub menu you leave that menu and move back one menu level.
• Right Rotary-Push-Turn-Switch (short: right rotary control) (g. 1/C): By turning the right rotary
control you select a drink or menu point in the display. By pushing the right rotary control, the
drink shown in the display will be brewed, or you access the selected menu item.
• Height-adjustable spout(g. 1/E): The spout can be adjusted to the height of your cups and glasses
by pushing it up or down. Hold the spout with thumb and index nger and move it up or down.
• Milk container (model 788 only): Fill the milk container with fresh, low-fat and cold milk. Close
the lid and connect one end of the connecting tube to the container and the other to the spout.
2.3. Filling with water and beans
Open the cover on the left (g. 1/F) and remove the water tank (g. 2). Clean it with clear, cold
tap water.
Rell the water tank to above the minimum mark (0.5 l) and insert it back into the appliance.
Make sure the tank is safely locked in place.
Close the cover on the left (g. 1/F).
Attention: Only use clear, cold water for the water tank! Never use sparkling water or any other liquids!
Non-compliance will render warranty claims void.
Open the cover of the bean container (g. 1/G and 3).
Fill with untreated, roasted coffee beans only.
Close the cover again and make sure it ts correctly.
Attention: Never use beans that have been treated during or after roasting with supplements such as
sugar or similar. This may damage the mill. Resulting repairs are not covered by the warranty.
2.4. Switching appliance on and performing initial start
Switch the appliance on with the on/off switch (g. 1/H).
Please set the following basic settings before you start brewing your rst coffee:
Setting the language
Turn the right rotary control to select your language.
Press the right rotary control to conrm your setting.
The display will now ask “INSERT FILTER?”
2.4.1. Using the appliance with lter
Included in the package is a Claris lter. When using this lter, the appliance needs to be descaled
less frequently as it softens the water.
Turn the right rotary control to “YES” and press for the appliance to recognize that a lter is in use.
Display shows “INSERT FILTER”.
Empty the water tank (g. 1/F and 2) and carefully screw the lter into the respective slot in the
water tank, using the integrated tool at the end of the measuring spoon (g. 4).
Attention: Do not overtighten or break.
Fill the tank with fresh water to above the minimum mark (0.5 l) and insert it back into the appliance.
Close the cover on the left (g. 1/F)
68 69
1. Safety information / 2. Initial start-up 2. Initial start-up
Loading ...
Loading ...
Loading ...