Loading ...
Loading ...
Loading ...
• for Caffè Americano: standard strength, aroma prole 2, quantity 120ml,
the display shows “ooo II 120ml”, model 758 “oo 120 ml.
Place a cup underneath the spout (g. 5).
Turn the right rotary control to the drink of your choice (e.g. Espresso) and press it.
Note: In the bottom line the display shows the current settings of the chosen coffee speciality. Strength
on the left, aroma prole in the centre and volume on the right.
Note: Pay attention if you prepare one or two cups and place the cups accordingly under the spout
(g. 5 and 6).
Press the right rotary control again to start brewing.
The cup light switches on (not model 758). The appliance is preparing a cup of your chosen drink in
the standard setting.
Brewing two cups
To brew two cups one directly after the other, press the right rotary control immediately after the
start of the process.
If you want to stop the process, simply press the right rotary control again.
The display shows “ABORTED”. The appliance cancels the process and returns to the main menu.
The standard setting can be altered in two different ways:
4.2.1. Live programming
You can change and save the standard setting during the brewing process as follows.
Turn the right rotary control in the main menu to “SETTINGS” and press it.
Turn the right rotary control to “DRINK RECIPES” and press it.
Turn the right rotary control to the drink of your choice (e.g. “ESPRESSO”) and press it.
Turn the right rotary control to “LIVE PROGRAMMING”.
Place a cup underneath the spout (g. 5).
To change the standard setting now press the right rotary control.
The display shows “SELECT STRENGTH”.
Turn the left rotary control to select your preferred strength (left for weaker, right for stronger coffee).
Press the right rotary control to conrm your choice.
The display shows “SELECT AROMA PROFILE” (not model 758).
Turn the left rotary control to select your preferred aroma prole (see 3.3.).
Press the right rotary control to conrm your aroma choice.
The display shows “PLEASE WAIT”. The appliance grinds, heats up and then starts the preparation.
The display shows “STOP COFFEE?”
Press the right rotary control once the required amount of coffee is reached.
The standard setting for the drink of your choice (e.g. Espresso) has now been changed and saved.
The display shows “RECIPE SAVED” for a short time and will then switch back to the main menu
with the new standard settings.
4.2.2. Manual programming
You can also change and save the standard settings manually.
Turn the right rotary control in the main menu to “SETTINGS” and press it.
Turn the right rotary control to “DRINK RECIPES” and press it.
Turn the right rotary control to the drink of your choice (e.g. “ESPRESSO”) and press it.
Select strength
Turn the right rotary control to “STRENGTH” and press it.
Turn the right rotary control to select the strength of your choice (left for weaker, right for stronger
coffee). Press the right rotary control to conrm the setting.
Select aroma (not model 758)
Turn the right rotary control to “AROMA” and press it.
Turn the right rotary control to select the aroma of your choice (see 3.4.). Press the right rotary
control to conrm the setting.
Select quantity
Turn the right rotary control to “COFFEE QUANTITY” and press it.
Turn the right rotary control to select the quantity of your choice (from 20ml to 240ml) and press it.
Note: Make sure that your cups t.
Select temperature (if “SETTINGS”, “TEMPERATURE”, “COFFFE” (see 3.4.) “INDIVIDUAL” is set in
the menu).
Turn the right rotary control to “TEMPERATURE” and press it.
Turn the right rotary control to the temperature of your choice (STANDARD, HIGH, MAXIMUM)
and press it to conrm the setting.
To exit a menu level turn the right rotary control to “EXIT” in each level. Then press it. Or press
the left rotary to go back one menu level.
Repeat until you are back in the main menu.
Note: If no changes are made to the settings for some time, the appliance switches back to the main
menu automatically.
4.3. Adjusting standard settings for drinks with milk
(CAPPUCCINO, CAFFÈ LATTE, LATTE MACCHIATO, WARM MILK, MILK FROTH)
Ex-factory the standard settings are
• for Cappuccino: strength standard, aroma prole 2, quantity 200ml,
the display shows “ooo II 200ml”, model 758 “oo 200ml”
• for Latte Macchiato: strength standard, aroma prole 2, quantity 300ml,
the display shows “ooo II 300ml”, model 758 “oo 300ml”
• for warm milk: quantity 150ml, the display shows “150ml”.
Using the special frother you can draw milk directly from the carton or any other container and pour
it straight into a cup or glass.
Connect the suction hose to the height-adjustable spout (g.7).
Connect the other end of the hose to the milk container (only model 788) or immerse it straight
into the carton or another container.
Attention: Dried milk residue is difcult to remove. Please clean thoroughly as soon as it has cooled off!
Always follow the display instruction “CLEAN FROTHER”.
Place a cup or a glass under the spout (g. 5).
Turn the right rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it.
Note: In the bottom line the display shows the current settings of the chosen coffee speciality. Strength
on the left, volume on the right.
Turn the right rotary control to start brewing.
The cup light switches on (not model 758). The appliance is preparing a cup or glass of the selected
drink in the standard setting.
Brewing two cups:
Note: 2 cups can only be prepared simultaneously when the drink does not require milk. Drinks with
milk can only be prepared individually.
76 77
4. Preparing coffee specialities 4. Preparing coffee specialities
Loading ...
Loading ...
Loading ...