Loading ...
Loading ...
Loading ...
installation 9
Lift the door while adjusting the washer. To
raise the door, rotate washer clockwise (when
viewed from the bottom). To lower door, rotate
washer counter_clockwise 'when viewed from the
bottom).
Raising/Lowering Door
2
Adjust flipper mullion height. For proper
connection with the flipper mullion guide, there
should be a separation about the thickness of a
coin (0.060 inches, or 1.5 mm) between the guide
and flipper mullion.
5 Re-tighten the set screw, ensuring it is between
the spokes of the set washer. Set screw will not
be tight, just insert until it is flush with the hinge.
Adjusting Flipper Mullion Height
3 Re-tighten set screw.
Set Screw
To adjust the flipper mullion:
1 Loosen the set screw located on the flipper
mullion hinge.
m_
_Flipper
_ _ Mullion
iI
Set
Mullion
Adjusting Flipper Mullion Screw
Loading ...
Loading ...
Loading ...