Loading ...
Loading ...
Loading ...
Read theseinstructionscompletely and carefully.
Step2--Install WarmingDrawer
[] Slide the left corner into opening and push
power cord into the hole leading to the
outlet location. Thread the cord through
as drawer is being pushed back into the
opening.
If the outlet is installed inside the
opening, plug the cord into the outlet.
In this location, the excess power cord
should be coiled and taped to the right
side of the refit. Make sm'e the cord does
not get trapped by the drawer:
/VOTE'. Insm'e that the power cord does not
contact the hot sml'i_ces on the bottom of
ovens, cooktops, or any other appliance.
[] Push the drmver back tmfil the front flange
is flush to the cabinet fl'ont.
[] Drill pilot holes through the holes in the
oxerlapping tl'[liile, one on each coYneI;
[] Drive wood screws proxided into each
coYnei;
[] Open the drawer flfllv.
/5
Loading ...
Loading ...
Loading ...