Loading ...
Loading ...
Loading ...
9. OPERATING THE SHREDDER
– 11 –
9.1 START UP OPERATION – FIGS. 6 - 7
Press the switch (1) marked “I” to start and marked
“O” to stop the motor.
Press the “circuit breaker” button (2) if the machine
does not work, ensure you have connected to the
power supply.
When the motor has been running for a few seconds
you can commence shredding.
The circuit breaker will be activated if the motor is
being overloaded either by too much material being
put into the machine or the blades jamming.
When the circuit breaker has been activated switch-
off the shredder and disconnect the power supply.
a. Unscrew the reamer knob (3) at the base of the
turret and open top section.
b. Remove the debris or obstruction from the
cutting area.
c.
Return the top section and tighten the reamer knob.
d. Leave motor a few minutes to cool down.
e. Reconnect to the power supply and press the
circuit breaker button.
f.
When ready to start shredding press the
“I”
switch
(1)
.
Warning: NEVER slacken off the reamer knob (3)
without having turned off the On/Off switch and
pulled the plug out off the socket.
Warning: The shredder will stop within 5 seconds
after switching off.
9.2 USING THE PLUNGER – FIG. 8
There is a plunger provided to aid feeding less bulky
material such as small twigs, leaves, other garden
waste and vegetation into the in-feed chute.
1. Load the material into the hopper.
2. Insert the plunger (4) into the in-feed chute
pushing the material onto the blade disc.
3. Wait until all the material has been shredder
before adding more material.
FIG. 6
(1)
FIG. 7
(3)
FIG. 8
(4)
(2)
Loading ...
Loading ...
Loading ...