Loading ...
Loading ...
Loading ...
6
CAUTION: Use only EPA Registered Bacteriostat. Under no circumstances should
you use Water Treatment products intended for Rotobelt or Ultrasonic
humidifiers.
NOTE: We recommend using Essick Air
®
Bacteriostat Treatment P/N 1970 when
you refill the water reservoir to eliminate bacterial growth. This is available for
purchase by visiting www.aircareproducts.com or calling 1-800-547-3888. Add
bacteriostat according to the instructions on the bottle.
3. After the filling process is complete, place the chassis/power pack unit into the
cabinet, so it fits without tipping or rocking.
4. Insert the water bottles into the humidifier, placing them with the valve cap end
down, so that the groove in the water bottle faces the inside. Note the orange
label on the bottle for correct orientation.
5. Replace the water bottle covers.
ABOUT HUMIDITY
Where you set your desired humidity levels depends on your personal comfort
level, the outside temperature and the inside temperature.
NOTE: Recent CDC tests show that only 14% of flu virus particles could infect
people after 15 minutes at levels of 43% humidity.
You may wish to purchase a hygrometer to measure the humidity level in your home.
The following is a chart of recommended humidity settings.
*When Outdoor
Temperature is:
°F ° C
Recommended
Indoor Relative
Humidity (RH) is
-20
-10°
2°
10°
20°
30°
-30°
-24°
-18°
-12°
-6°
-1°
15 - 20%
20 - 25%
25 - 30%
30 - 35%
35 - 40%
40 - 43%
*Or above
Model 1990 digital hygrometer is available for purchase by calling 1-800-547-3888.
NOTE: External hygrometer readings and humidistat readings may differ.
Humidity levels can vary significantly even in one room. The amount of time it
takes to affect the room humidity depends on the relative humidity of the air. In
especially dry areas it could take up to 48 hours to see humidity climb to the
desired level.
CONTROLS AND OPERATION
1. Plug cord into wall receptacle. Your humidifier is now ready for use.
2. The digital touch screen panel allows you to control the fan speed and humidity
level by simply tapping the appropriate switch on the front of the panel.
3. A digital display provides information on the status of the unit. Depending on
which function is being accessed, it displays ambient and set humidity, fan speed
and status of the unit.
IMPORTANT: Water
damage may result if
condensation starts to form
on windows or walls.
Humidity SET point should
be lowered until
condensation no longer
forms. We recommend
room humidity levels do not
exceed 50%.
Loading ...
Loading ...
Loading ...