Loading ...
Loading ...
Loading ...
4
ASSEMBLY
UNPACKING AND SETTING UP THE UNIT
1. Remove the two inserts from the top of the humidifier.
2. Open the water bottle covers. Remove the water bottles, lift off the
chassis/power pack and then remove the humidifier cabinet from the carton.
3. Remove the evaporative wick and all of the remaining packaging materials from
the cabinet. Check to see that you have all of the following items removed from
the boxes, accessory kit, and cabinet before discarding the packaging:
♦ Filler Hose
♦ Evaporative Wick
♦ Caster kit
♦ Two Water Bottles
♦ Bacterial treatment sample
♦ Float and support with two screws
♦ Air Filter
♦ Manual
CASTERS
4. Turn the empty cabinet upside
down. Insert each caster stem into
a caster hole on each corner of
the humidifier bottom. The
casters should fit snugly and be
inserted until the stem shoulder
reaches the cabinet surface. Turn
the cabinet right side up.
NOTE:
To ensure both bottles will empty properly, use a
bubble level to verify the humidifier cabinet is
placed on a level surface.
EVAPORATIVE WICK
5. Insert the 1041(CN) wick into the unit.
The wick has a mounting rib on
the top edge which hooks over
a rib at the inside back of the cabinet.
This allows the wick to hang in the
water channel (see cutaway illustration
for details). Hang wick into cabinet as
shown.
Loading ...
Loading ...
Loading ...