Loading ...
Loading ...
Loading ...
20
OPERATION (cont.)
Operating Modes
Office Pro 63 operates in 2 modes, FAN ONLY and COOL. When in FAN ONLY
mode, the unit circulates the surrounding air, Office Pro 63 is equipped with an
automatic fan speed control when operating in FAN ONLY mode. When in COOL
mode, the compressor is operated and cool air is circulated. Office Pro 63 is
equipped with automatic condenser fan speed control depending on room
temperature.
Office Pro 63 operates in FAN ONLY mode for approximately 120 seconds before
the compressor engages.
(Time delay setting is around 120 seconds.)
1. Temperature Control
The room temperature thermistor allows the unit to switch automatically between
COOL and FAN ONLY modes. This is dependent upon inlet air temperature versus
set point temperature.
2. Fan Mode Control DIP Switch
The fan mode control DIP switch determines whether the fan continues to operate
or stop when the compressor cycles off. (Set point temperature equals inlet air or
room temperature.) The unit has been preset at the factory for continuous fan
operation.
3. Temperature Scale Display DIP Switch
The temperature scale display DIP switch changes the temperature(s) that are
displayed to either °C or °F. The unit has been preset from the factory to display the
temperature(s) in °F.
Note: If you wish to change the fan mode operation (OPERATE to STOP), and/or
the temperature scale display (°F to °C), contact your MovinCool reseller.
Loading ...
Loading ...
Loading ...