Loading ...
Loading ...
Loading ...
Problem solving guide
52
Indicator lights or information on the time display
Problem Cause and remedy
The indicator light
comes on at the end of
the programme.
The tumble dryer is not working correctly or econom-
ically. Possible causes could be clogging caused by
fluff or detergent residue.
To switch off the indicator light, open and close
the door (with the tumble dryer switched on).
Please see “Cleaning and care” for notes on clean-
ing.
Clean the fluff filters.
Also check the plinth filter and clean it if neces-
sary.
You can influence when the indicator lights up.
To do this, follow the instructions in “Program-
mable functions – Airways indicator”.
lights up The programme selector has been moved.
Select the original programme. The time remaining
will appear in the display again.
Bars flash in the display
at the end of a pro-
gramme:
.........
The programme has finished but the laundry has not
yet cooled down.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
Lines flash and light up
after switching on: .
Programme selection is
not possible.
The PIN code is activated.
See “Programmable functions”, “PIN code”.
and another number
combination flash after
a programme has been
cancelled, a signal
sounds
No obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact the Miele
Service Department.
Loading ...
Loading ...
Loading ...