Loading ...
Loading ...
Loading ...
27
Do NOT Grab The Door Handle When Locking
NOTE:
After pushing the Passive Entry lock button,
you must wait two seconds before you can lock
or unlock the doors, using either Passive Entry
door handle. This is done to allow you to check
if the vehicle is locked by pulling the door
handle without the vehicle unlocking.
The Passive Entry system will not operate if the
key fob battery is depleted.
The vehicle doors and liftgate can also be
locked by pushing the lock button on the key
fob or on the interior door lock.
To Unlock/Enter The Liftgate
With one of the vehicle’s Passive Entry key fobs
c
lose to the liftgate, push the liftgate release
button.
External Liftgate Release Button
NOTE:
If the key fob is inadvertently forgotten inside
of the cargo area, and an attempt is made to
close it from outside, the liftgate will not lock.
With the doors locked, the liftgate unlocked,
and the key fob detected inside the vehicle, the
liftgate will unlock again and the lights flash
twice.
Before driving, make sure the liftgate is closed
correctly.
To Lock The Liftgate
With a valid Passive Entry key fob close to the
vehi
cle, push the Passive Entry button located as
part of the liftgate release button switch. All doors
and the liftgate will lock. Door locking will activate
the alarm as well.
External Liftgate Release Switch
(
Vehicles With Passive Entry)
NOTE:
The liftgate may still be locked by pushing the lock
bu
tton on the key fob, pushing the door lock
button on the door handles, or pushing the lock
button on the interior door panel of the vehicle
Ú
page 248.
POWER LOCK SAFETY DEVICE
The Power Lock Safety Device prevents the
operation of the interior door handles and the
door lock and unlock buttons. The power lock also
prevents opening of the doors from inside the
passenger compartment.
It is recommended to lock the vehicle doors each
ti
me the vehicle is parked.
Loading ...
Loading ...
Loading ...