Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY
182
12. Lift the extension lever on the wrench.
Jacking Location
13. Rotate the extension lever clockwise until the
rou
nd pin on the jack engages in the hole in
the lifting block located about 6
inches
(15 cm) from the outside edge of the body.
The
lifting points are marked by triangles
visible on the plastic body panel.
Jacking Point Indicator
s
14
. Raise the vehicle by turning the jack screw
cl
ockwise, using the swivel wrench. Raise the
vehicle only until the tire just clears the
surface and enough clearance is obtained to
install the compact spare tire. Minimum tire
lift provides maximum stability.
15. Remove the five wheel bolts and take the
whe
el off.
16. Make sure the contact surfaces between
compact spare tire and hub are clean so that
the fastening bolts will not come loose.
17. Fit the compact spare tire by inserting the
firs
t wheel bolt for two threads into the hole
closest to the valve.
2 — Extension Lever
3 — Wrench Head
4 — Jack
5 — Lifting Block
CAUTION!
Do not attempt to raise the vehicle by jacking
on locations other than those indicated in the
Jacking Instructions for this vehicle.
WARNING!
Raising the vehicle higher than necessary can
make the vehicle less stable. It could slip off
the jack and hurt someone near it. Raise the
vehicle only enough to remove the tire.
CAUTION!
Be sure to mount the spare tire with the valve
stem facing outward. The vehicle could be
damaged if the spare tire is mounted
incorrectly.
Loading ...
Loading ...
Loading ...