Loading ...
Loading ...
Loading ...
ENGLISH
Fixed: Output level is xed and the C 399’s Volume Control is bypassed.
This feature is sometimes referred to as “Cinema Bypass” because it allows
the C 399 to be used for the front channels of a surround sound system by
relegating the volume control function to the surround processor.
At Fixed volume level setting, front panel display will show “xx.x dB Fixed” as
the volume control is adjusted.
HOW TO NAVIGATE VOLUME CONTROL LEVEL SETTING
A While at “Volume Control” menu, press [f].
B Use front panel [a/s] or SR 9’s [A/S] buttons to toggle between
“Variable” and “Fixed” level options.
1 While at “Variable” option, use front panel [d] or SR 9’s [D] button
to select “Variable” level and return to “Source Setup” menu
selections.
2 While at “Fixed” option, use front panel [d] or SR 9’s [D] button to
select “Fixed” level and return to “Source Setup” menu selections.
a With “Fixed” level selected and back to “Source Setup” menu
selections, use front panel [a/s] or SR 9’s [A/S] buttons to go
“Fixed Volume” option. “Fixed Volume” manifests among “Source
Setup” options only if “Fixed” is the selected “Volume Control” level.
b Use [f] button to go to Fixed Volume level setting.
c Use front panel [a/s] or SR 9’s [A/S] buttons to set preferred
dB level setting. Then, use front panel [d] or SR 9’s [D] button
to save dB level selection and exit Fixed Volume setup mode.
AUTO SENSE
Auto Sense can be setup for each Source. Auto Sense feature enables the
designated Source to wake up from standby mode when an active source
is detected from the particular Source’s input.
On: Unit wakes up to the designated Source from standby mode when
an active source is detected from the particular Source’s input.
O: Unit does not wake up to the designated Source from standby
mode even if it is triggered by an active source.
NOTES
• Auto Sense is not applicable for Phono and BluOS (if installed) sources.
• Auto Standby must be set to ON for Auto Sense to work.
ANALOG BYPASS
All analog signals remain in the analog domain without analog-to-digital
conversions.
On: DSP circuitry is bypassed but full tone control functions remain.
O: Analog bypass feature is turned o.
NOTE
Analog Bypass is applicable only for Phono, Line 1 and Line 2 sources.
OPERATION
USING C 399
18
Loading ...
Loading ...
Loading ...