Loading ...
Loading ...
Loading ...
9
Cleaning Instructions
IMPORTANT: Do not use a wire brush, scouring pad, etc., as they may damage the filters.
Filter Reinstallation Instructions
IMPORTANT: To avoid damage to dishwasher, do not operate your dishwasher without the Ultra Wash™ filters properly installed.
Be sure the lower filter is securely in place and the upper filter assembly
is locked into place. If the upper filter assembly turns freely,
it is not locked into place.
360º POWERWASH
®
The 360º PowerWash
®
lower wash arm provides exceptional spray coverage and reaches further into corners.
TURBOZONE REACH™
The TurboZone Reach™ feature provides corner-to-corner cleaning for the upper rack. Spray jets under the rack spray up into bowls
and glasses that are loaded into the corners of the upper rack.
DISHWASHER EFFICIENCY TIPS
Hot water dissolves and activates the dishwasher detergent. Hot water also dissolves grease on dishes and helps glasses dry
spot-free. For best dishwashing results, water should be 120°F (49°C) as it enters the dishwasher. Loads may not wash as well
if the water temperature is too low.
Additional efficiency tips
■
To save water, energy, and time, only scrape dishes. Do not rinse dishes before putting them into the dishwasher.
■
Use a delay feature to run your dishwasher during off-peak hours. Local utility providers recommend avoiding heavy usage
of energy at certain times of day.
■
During the summer, run your dishwasher at night. This reduces daytime heat buildup in the kitchen.
■
Use a rinse aid to improve drying.
Rinse filter under running water until most soils are removed. If you
have hard-to-remove soils or calcium deposits from hard water, a
soft brush may be required.
1. Noting the previous illustrations, place the lower filter under the locating tabs in the
bottom of the dishwasher, so the round opening for the upper filter assembly lines up
with the round opening in the bottom of the tub.
2. Insert the upper filter assembly into the circular opening in the lower filter.
3. Slowly rotate the filter clockwise until it drops into place. Continue to rotate until the filter
is locked into place. If the filter is not fully seated (still turns freely), continue to turn the
filter clockwise until it drops and locks into place.
To replace upper filter assembly
Loading ...
Loading ...
Loading ...