Kenmore 66514799N512 Elite dishwasher

User Manual - Page 19

For 66514799N512.

PDF File Manual, 80 pages, Download pdf file

Loading ...
Loading ...
Loading ...
19
Dishwasher Feedback Section
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When Locked is lit, all buttons are
disabled. The dishwasher door can still be opened/closed while the controls are locked.
To turn on Control Lock
Press and hold SANI RINSE for 3 seconds. Locked will light. If you press any pad while your dishwasher is locked, the light flashes
3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off Control Lock
NOTE: You may need to disable Sleep mode by pressing either START/RESUME or CANCEL/DRAIN or by opening and closing
the door before you are able to turn off Control Lock.
Press and hold SANI RINSE for 3 seconds. The light turns off.
Cycle Indicators and Time Display
The indicators glow when the dishwasher is washing, drying, complete, and/or sanitized.
They also glow when the control is locked and/or the Delay option is selected.
The Status Display is used to follow the progress of the dishwasher cycle and to show other
information.
Estimated cycle time is displayed in hours and minutes as you make cycle and option
selections. After you start the dishwasher, the display counts down the time.
When you select the Delay option, the time display will give the number of hours followed
by an “H”.
The single indicator light on the front of the door panel (A) will remain blue during wash/rinse,
red during dry, and green when complete.
A
Selecting Cycles and Options
1. To repeat the same cycle/options used on previous cycle, press START/RESUME once to show which selections you used.
To change cycle, select desired cycle.
2. Select the desired options, then press START/RESUME to start the cycle. Not all options are available for every cycle. If an
invalid option is selected for a given cycle, the lights will flash.
Turning Off/On the Sound
Press and hold HIGH TEMP WASH for 3 seconds to toggle sound on and off. The sound will not deactivate for cycle interruption
or service required messages.
Loading ...
Loading ...
Loading ...