Loading ...
Loading ...
MODEL S9DFL/850/BZ/V1 & S9DFL/850/WH
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com
4" Round External J-box Installation
2. Pull the power supply wires to the side and install the fixture
crossbar onto the J -box with the screws provided. Connect
the ground wire to the ground screw on the crossbar (Fig B).
1. Unscrew the canopy mounting nuts and remove the fixture
crossbar (Fig A).
2. Before installing the round plate, add silicone sealant between
the rear of the round plate and the J-box. Pull the power supply
wires through the round plate and install the round plate along
with crossbar, onto the J -box with the screws provided. Connect
the ground wire to the ground screw on the crossbar (Fig B).
3. Using the wire nuts provided, connect the white fixture wire to
the neutral house wire. Connect the black fixture wire to the power
supply wire (Fig C).
4. Adjust the crossbar fixture screws and tighten the center swivel
screws. Before installing the fixture canopy, add silicone sealant
between the front of the round plate and fixture canopy. Insert the
fixture canopy holes through fixture mounting screws (Fig D).
5. Position into place and secure fixture by installing the rubber
washers and the canopy mounting nuts, then tighten the nuts (Fig E).
Fig A.
Fig B.
Fig C. Fig D.
Fig E.