Loading ...
MODEL S9DFL/850/BZ/V1 & S9DFL/850/WH
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com
Wall Mount Installation
Fig D.
Fig B.
WARNING: TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE
INSTALLING THE FIXTURE IN ORDER TO PREVENT POSSIBLE ELECTRIC SHOCK.
WARNING:
This luminaire should be installed by qualified electrician. To avoid the risk of fire, explosion or electric shock, this product
should be installed, inspected and maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock: Be certain electrical power is OFF before and during installation and maintenance.
Make sure the supply voltage is the same as the rated luminaire voltage. Do not operate in ambient temperatures above those indicated on
the luminaire nameplate. Keep lens tightly closed when in operation.
1. Unscrew the canopy mounting nuts and remove the fixture
crossbar (Fig A).
2. Pull the power supply wires to the side and install the fixture
crossbar onto the J -box with the screws provided. Connect
the ground wire to the ground screw on the crossbar (Fig B).
3. Using the wire nuts provided, connect the white fixture wire to
the neutral house wire. Connect the black fixture wire to the power
supply wire (Fig C).
5. Position into place and secure fixture by installing the rubber
washers and the canopy mounting nuts, then tighten the nuts (Fig E).
6. Caulk between the light fixture and the wall surface with a
silicone sealant (not included).
4. Adjust the crossbar fixture screws and tighten the center
swivel screws. Insert the canopy holes through fixture
mounting screws (Fig D).
Fig A.
Fig C.
Fig E.
Loading ...