Loading ...
Loading ...
Loading ...
BLY
CONNECT BATTERY (See Figs. 2 and 3)
&
CAUTION: Do not short battery termi_
nals. Before connecting battery, re-
move metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
• Remove cardboard packing from seat pan and lift seat
pan to raised position_
° Open battery box door.
• Remove terminal protective caps and discard.
= If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps.
° First connect RED battery cable to positive (+) terminal
with hex bolt, flat washer, lock washer and hex nut as
shown. Tighten securely.
= Connect BLACK grounding cable to negative (-) termi-
nal with remaining hex bolt, flat washer, lock washer'
and hex nut. Tighten securely.
o Close battery box door.
Open battery box door' for:
o Inspection for secure connections (to tighten hard-
ware),
° Inspection for' corrosion.
o Testing battery_
° Jumping (if required).
° Periodic charging
DISCARD
TERMINAL
POSITIVE PROTECTIVE
(RED) CABLE CAPS
LOCK
HEX WASHER
NUT
FLAT
NASHER
HEX
BOLT
NEGATIVE
(BLACK) CABLE
FIG. 2
SEAT
PAN
BOXDOOR
FIG. 3
INSTALL SEAT (See Fig. 4)
Adjust seat before tightening adjustment bolt.
= Remove cardboard packing on seat pan
Place seat on seat pan and assemble shoulder boll
= Assemble adjustment bolt, lock washer and flat washer
Ioosely_ Do not tighten.
° Tighten shoulder bolt securely
o Lower seat into operating position and sit on seal
= Slide seat until a comfortable position isreached which
allows you to press clutch/brake pedal all the way
down_
• Get off seat without moving its adjusted position
. Raise seat and tighten adjustment bolt securely.
SEAT
SEATPAN _._/ _
S.C,'BEn \\\
BOLT
FIG. 4
8
Loading ...
Loading ...
Loading ...