Kenmore 58074109400 room air conditioner

User Manual - Page 6

For 58074109400.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
INSTALLATION
To avoid the possibiity of personal injury, unplug
powerto unit before installing or servicing.
Pick a location which will allow you to blow the cold
air into the area you want. Windows used for
installation must be strong enough to support the
weight of the air conditioner. Good installation with
special attention to the proper position of the unit
will lessen the chance that service will be needed.
When cooling more than one room, installation
location is very important. To cool your rooms, cold
air must be blown from the air conditioner in a
straight path.
HOW TO INSTALL
If the air conditioner is blocked by a storm
window frame, see step 7 on page 8 before
beginning to install.
_lcut the FOAM STRIP (ITEM G) to fit the underside
of the window sash. Open the window, peel off the FOAM
STRIP backing and attach the FOAM STRIP as shown in
FIG. 3.
FOAM STRIP
(iTEM G)
FIG. 3
B Mark center line with pencil on the center of the inner
sill, as shown in FIG. 4.
INDOOR
CENTERLINE INNER SILL
FIG. 4
I_ Install support bracket on window. See FIG. 5.
Install leveling bolt up through bottom side of support
bracket. Select leveling bolt(ITEM B or C) based upon
angle of outer window sill. For a more angled sill, select
longer bolt(ITEM B). The bolt should be positioned based
upon the width and angle of window sill. Select either 1st,
2nd or 3rd hole position of support bracket.
Position bracket on sill on the center line of window
(See FIG. 5).
Fasten bracket loosely to sill with screws (ITEM D)
provided.
Adjust leveling bolt so that the air conditioner will be
installed with a very slight tilt (about !/4") downward
toward the outside for proper drainage. Tighten bracket
screws.
SiLL OF SUPPORT Bt_,'CKET
SILL
CENTER I
OF WINDOW
"LEVELING BOLT
tO)
FIG. 5
SCREW
INNERSILL
INDOOR
SUPPORT
BRACKET
ABOUT 1/4"
I_EVELING i
_ BOLSTERSILl
1 :If OUTDOOR FIG.6
During the following step, hold unit firmly until
window sash is lowered to top channel behind
curtain frames. Personal injury or property
damage may result if unit falls from window.
-6-
Loading ...
Loading ...
Loading ...