Loading ...
Loading ...
Loading ...
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a Phillips screwdriver _- _, an adjustable
wrench _J_ , and a rubber mallet , -
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assem-
bled. If a part is not in the parts bag, check to see if it has been pre-assembled. If a part is missing, call
toll-free 1-888-533-1333.
Star Washer M4 x 13mm M8 Split M10 Spacer Wave Washer
(100)-3 Washer (93)-2 Washer (72)-2 (76)-2 (98)-8
M6 Split
Washer (88)-8
o/
M10 x 20mm x M10 x 20mm x M10 x 20mm x
1mm Washer 1.5mm Washer 2mm Washer
(81)-2 (84)-2 (92)-4
M10 x 25mm
Washer (94)-4
M8 Nylon
Locknut (96)-4
M10 Nylon
Locknut (97)-2
M4 x 16mm M4 x 16mm
Self-tapping Screw (86)-4
Screw (79)-10
M6 x 35mm Button
Screw (87)-8
M8 x 42mm Bolt
(71)-4
M8 x 16mm Button
Screw (95)-3
M8 x 48mm Button
Screw (78)-2
M10 x 20mm Button
Screw (91)-4
M10 x 23mm Shoulder
Screw (80)-8
M10 x 62mm Bolt (89)-4 M10 x 78mm Button Screw (90)-2
Loading ...
Loading ...
Loading ...