Loading ...
Loading ...
Loading ...
MAINTENANCE CHECKS
DISCONNECT SPARK PLUG WIRE AND
COVER BEFORE PERFORMING ANY
MAINTENANCE (EXCEPT CARBURETOR
ADJUSTMENT) TO PREVENT ACCIDEN-
TAL STARTING OF ENGINE,
PREVENT FIRES! KEEP THE ENGINE
FREE OF GRASS, LEAVES, SPILLED
OIL OR FUEL. REMOVE FUEL FROM
TANK BEFORE TIPPING UNIT FOR
MAINTENANCE, CLEAN MUFFLER
AREA OF ALL GRASS, DIRT AND DE-
BRIS,
AIR CLEANER
BLOWER
CYLINDER
FINS
SPARK PLUG
WIRE AND
COVER
COOLDNG SYSTEM
Your engine is air cooled. For proper engine performance and
longer life KEEP YOUR ENGINE CLEAN.
Io Clean Air Screen (Fig_ 23) frequently using a stiff bristled
brush,
2o Remove Blower Housing (Fig, 23) and clean as necessary,
3. Keep Cylinder Fins (Fig. 23) free of dirt and chaff
4 DRY, TYPE PAPER AIR CLEANER (FIG'S 23 & 24).
Replace Air Cleaner Element once a year or more often if
used in extremely dusty or dirty conditions.
NOTE: DO NOT ATTEMPT TO CLEAN OR OIL AIR
CLEANER ELEMENT..
Replacement Air Cleaner Elements are available at any
Sears Service Center°
To insta_I new Air Cleaner" E{ement, proceed as fo{lows:
a_ Loosen two Screws that secure Body to Bracket
b Turn Body counterclockwise ( _ ) and remove Body
and Ah" C[eaner Element from Bracket, Discard Air
Cleaner Element,,
c, Clean inside of Bracket and Body thoroughly
d, _nsert new Air Cleaner Element into Body and re=
assemble Body to BracI_et as it was before removal
Tighten Screws securely,
NOTE: NEVER RUN ENGINE WITH AIR CLEANER
ELEMENT REMOVED.
AIR
SCREW CLEANER
ELEMENT
BRACKET SCREW
BODY
FIGURE 23
FIGURE 24
-9-
Loading ...
Loading ...
Loading ...