Loading ...
Loading ...
Loading ...
Theopei'atonofar_ylawnm,0wer.can
resultinforeignobjectsthrowniniothe
eyes,whichcanresultinsevereeye
damage.A wayswearsafetyglassesor
eye shields while .operating your awn
mower or performing any adjustments or
repairs, We recommend a wide vision
safety mask over spectacles or standard
salety glasses.
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED
The engine speed Was set at the factory
for optimum performance. Speed is not
adjustable.
ENGINE ZONE CONTROL
_,CAUTiON: Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the risk of
blade contact injury. Do not under any
circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine ts running.
• Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower,
TO ADJUST CUTTING HEIGHT
• Raise wheels for low cut and lower
wheels for high Cut.=
° Adjust cutting height to suit your
requirements, Medium position iSbest
for most lawns.
• To change cutting height, squeeze
adjuster lever toward wheel. Move
wheel up or down to suit your require-
ments, Be sure a I wheels are in the
same setting°
NOTE; Adjuster IS pi'_ii_Q_lt!oned
when plate tab inserts ir_6' hSie in lever,
Also, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs.
Lower Wheels for High Cut Plate Tab
TO ATTACH GRASS CATCHER
, Close the flip lid. Flip lid must be closed
while operating lawn mower.
• Lift the rear door on the mower housing
and place the grass catcher frame onto
the formed t_bs on the rear door hinge
bracket.
- The grass catcher is secured to the lawn
mower housing when the rear door is
lowered onto the gross catcher frame.
,_CAUTION: Do not run your lawn
mower without clipping deflector or
approved grass catcher in place. Never
attempt to operate the lawn mower with
the rear door removed or proppe d Open.
Hinge Grasscatcher
bracket frame
tabs
TO EMPTY GRASS CATCHER
, = To remove grass catcher, release
operator Presence ¢_0ntrol bar to stop
engine.
- Lift up rear door and remove the grass
catcher by the handle,
NOTE: Do not drag the bag when empty-
ing; it wi!l cause unnecessary wear.
Raise Wheets for Low Cut
Loading ...
Loading ...
Loading ...