Loading ...
Loading ...
Loading ...
To Operate Speed Control
Speed control lever should always be set on lowest
speed for starting, then gradually moved to desired
higher speed to avoid splashing ingredients out of
bowl. See page 15 for Speed Control Guide.
To Lock Motor Head
Speed Control
1 Make sure motor head is completely down.
2 Place locking lever in LOCKposition.
_ Before mixing, test lock by attempting to
raise head.
Lock Unlock
To Unlock Motor Head
1 Place lever in UNLOCKposition.
NOTE: Motor head should always be kept in LOCKposition when using
mixer.
, I . i IN( !)i IIEL!I::
ToAttach Pouring Shield
'i Turn speed control to OFF.
;J Unplug stand mixer or disconnect powen
::_ Attach flat beater, dough hook, or wire whip and bowl (see page 11).
4 From the front of the mixer, slide the pouring shield over the bowl until
the shield iscentered. The
bottom rim of the shield
should fit within the bowl.
To Remove Pouring Shield
Turn speed control to OFE
2 Unplug stand mixer or
disconnect power.
:5 Lift the front of the pour
shield clear of the bowl
rim and pull forward.
'; Removeattachment and
bowl.
To Use Pouring Shield
1, For best results, rotate the shield so the motor head covers the "u"
shaped gap in the shield. The pouring chute will be just to the right
of the attachment hub as you face the mixer.
2 Pour the ingredients into the bowl through the pouring chute.
* If Pouring Shield is included.
Loading ...
Loading ...
Loading ...