Loading ...
Loading ...
Loading ...
__1 r_,!_Im3r_,1m]lll_'_lII_N:1_III__]
WARNING: AVOID INJURY.
Read and understand the entire
Safety section before proceeding.
TIPPING SEAT FORWARD
Put steering levers up and tip seat forward
(figure 7).
1. Seat Tipped Forward
2. Mounting Hardware
Figure 7
SEAT ADJUSTMENT
1. Tip the seat forward.
2. Loosen mounting hardware and slide
seat forward or backward to desired
position. Tighten mounting hardware
(figure 7).
3. Tip seat back.
MOWER DECK REMOVAL AND
INSTALLATION
915131:
Remove (Figure 8)
1. Remove PTO belt from the engine drive
pulley (see REPLACING PTO BELT on
page 25).
2. Disconnect PTO actuator cable from the
cable anchor and deck idler arm
(Figure 8).
1. Cable Anchor
2. PTO Actuator Cable
3. Idler Arm
Figure 8
NOTE: Perform steps 3 and 4 for the right
and left side of unit.
3. Disconnect drag link from the front deck
bracket.
4. Disconnect front and rear trunnions from
the lift arms.
5. Slide mower deck out from under unit.
915141, 143:
Remove (Figure 10)
1. Remove PTO belt from the engine drive
pulley (see REPLACING PTO BELT on
page 25).
NOTE: Perform step 2 and 3 for the right and
left side of unit.
2. Disconnect drag link from the front deck
bracket.
3. Disconnect front and rear trunnions from
the lift arms.
4. Slide mower deck out from under unit.
GB - 18
Loading ...
Loading ...
Loading ...