Loading ...
Loading ...
Loading ...
Place Unit in Operating Position
(Figure3):
NOTE: The seat is shipped with the seat
positioned as far back as possible.
1. Tip seat forward and adjust the seat as
needed (see TIPPING SEAT
FORWARD on page 18 and SEAT
ADJUSTMENT on page 18).
2. Remove eccentric spacers and rotate
steering levers to the operating position.
Reinstall spacers. Do not tighten.
3. Adjust steering levers (see ADJUSTING
STEERING LEVERS on page 24).
1. Steering Lever 3. Eccentric
2. Seat Spacer
Figure 3
Check Engine Oil Level
Referto Engine Manual.
Check Tire Pressure
A AUTION: Avoid injury!
Explosive separation of tire and
rim parts is possible when they
are serviced incorrectly:
Do not attempt to mount a
tire without the proper
equipment and experience
to perform the job.
Do not inflate the tires
above the recommended
pressure.
Do not weld or heat a
wheel and tire assembly.
Heat can cause an
increase in air pressure
resulting in an explosion.
Welding can structurally
weaken or deform the
wheel.
Do not stand in front or
over the tire assembly
when inflating. Use a clip-
on chuck and extension
hose long enough to allow
you to stand to one side.
See SPECIFICATIONS on page 30.
Level Mower Deck
See LEVELLING AND ADJUSTING PITCH
OF MOWER DECK on page 20.
Fill Fuel Tank
See FILLING FUEL TANK on page 13.
Check Safety Interlock System
A ARNING: Safety interlockfailure and improper operation of
unit can result in death or serious
injury. Check system before each
use to make sure it is functioning
properly.
See Safety Interlock System on page 12.
Check function of all controls
See OPERATION on page 12.
GB - 10
Loading ...
Loading ...
Loading ...