Loading ...
Loading ...
Loading ...
Vacation time
Power failure
If you move
Anti
condensation
pipe
Exterior
Interior
After cleaning
Warning
General information
Duringaverage length vacations, you will probably find it best to leavethe refrigerator
in operation. Placefreezable items infreezer for longer life.
When you plan not to operate, remove all food, disconnect the power cord, clean the
interior thoroughly, and leaveeach door OPEN to prevent odor formation.
Most power failures that are corrected in an hour or two will not affect your
refrigerator temperatures.
However, you should minimize the number of door openings while the power isoff.
Remove or securely fasten down all loose items inside the refrigerator.
To avoid damaging the height adjusting screws, turn them allthe way into the base.
The outside wall of the refrigerator cabinet may sometimes get warm, especiallyjust
after installation.
Don't be alarmed.This isdue to the anti-condensation pipe,which pumps hot
refrigerator to prevent "sweating" on the outer cabinet wall.
Cleaning
It is important that your refrigerator be kept clean to prevent undesirableodors. Spilled
rood should be wiped up immediately, since it may acidify and stain plasticsurfaces if
allowed to settle.
Use a lukewarm solution of mild soap or detergent to clean the durablefinish of your
refrigerator.
Wipe with a clean damp cloth and then dry.
Regularcleaning is recommended. Wash all compartments a bakingsoda solution or a
mild detergent and warm water. Rinseand dry.
Pleaseverify that the power cord is not damaged, power plug is not overheated, or
power plug is well inserted into the power consent.
Always remove power cord from the wall outlet prior to cleaning in the vicinity of
electrical parts (lamps,switches, controls, etc.).
Wipe up excess moisture with a sponge or cloth to prevent water or liquid from
getting into any electrical partand causing an electric shock.
Never use metallic scouring pads,brushes, coarse abrasive cleaners, strong alkaline
solutions, flammable or toxic cleaning liquidson anysurface.
Do not touch frozen surfaces with wet or damp hands, because damp object will stick
or adhere to extremely cold surfaces.
Loading ...
Loading ...
Loading ...