Loading ...
Loading ...
Loading ...
Use this cycle for pre- Use
rinsed and lightly-soiled covered
loads. This cycle uses detergent
less hot water than the dispenser
Normal Wash cycle, section,
Wash Main Purge Final Dry Time Water
Wash Heated (min) Usage
Rinse (gal/L)
• • • • 62* 4.6/17.4
140_F
(6ooc)
Use this cycle for china Use
and crystal. This cycle covered
uses a light wash and detergent
gentle dry. During the dispenser
heated dry, the heating section,
element cycles on and off.
Wash Main Purge Final Dry Time Water
Wash Heated (min) Usage
Rinse (gal/L)
• • • • 58* 4.8/18.2
130°F cycled
(54oc)
UI
Use this rinse cycle for Do not use
rinsing dishes, glasses, detergent
and silverware that will with this
not be washed right away. cycle.
Wash Main Rinse Rinse Dry Time Water
Wash (min) Usage
(gaVL)
• 10 2.2/8.3
During the first minute of a cycle
Press a new cycle and/or options.
After the first minute of a cycle
1. Press
CANCEL/DRAIN glows. The dishwasher pauses for 5
seconds and starts a 2-minute drain (if needed). Let the
dishwasher drain completely.
2. Check the detergent dispensers. If the main wash cup has
opened and the detergent washed away, refill the cups as
needed.
3. Close the door.
4. Press a new cycle and/or options.
5. Press START.
Add tems ..... ",,
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the main wash
section is still closed, you can add items.
To add items
1o Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the main wash detergent dispenser is still
closed, add the item.
3. Close the door, but do not latch it. Wait 30 seconds for the air
in the dishwasher to warm up. This reduces the amount of
moisture escaping from the vent when restarting a cycle.
4. Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5-second pause.
Anytime during a cycle, press
CANCEL!DRAIN glows. The dishwasher pauses for about 5
seconds and starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light goes off when the
dishwasher finishes the drain.
To stop the drain
You can press Cancel/Drain again to stop the drain immediately.
Remember to drain the dishwasher before starting a new cycle.
NOTE: A small amount of water remains in the dishwasher. This
is normal.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear all
options and cycles.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off.
Select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: Ifthe last cycle you completed was a rinse cycle, when
you press Star[, the dishwasher runs the last full wash cycle and
options.
Hi Temp Wash
Select this option to heat the water to 140°F (6O°C) during parts
of the cycle. Heating the water helps improve washing results.
This option adds both heat, water and wash time to parts of the
cycle. Hi Temp Wash is useful when loads contain baked-on
food.
14
Loading ...
Loading ...
Loading ...