User Manual Sabre PA-01 Personal Alarm

Documents for Sabre PA-01

The following documents are available:
User Manual Photos
PA-01 photo

User Manual

For PA-01.

This Personal Alarm features a dual siren design with the two sirens sounding at different frequencies.
The dual sirens oscillate to maximize attention. The compact design allows the Personal Alarm to be
discretely carried on a key ring, purse, etc. The idea is to be prepared, so take the Personal Alarm
wherever you go. It is recommended the Personal Alarm be carried when walking alone, entering
buildings, hallways, elevators, parking lots, etc.
Directions: Remove the plastic battery protection slip from back of alarm. To activate the alarm, pull
the pin from the plastic housing. A 110 dB siren will sound. To de-activate, slide the pin back into the
alarm unit until it snaps in place. It is recommended that the Personal Alarm be tested periodically to
ensure battery performance. Replace the batteries if the Personal Alarm ceases to sound or the volume
is low.
To change batteries: Using a screwdriver remove the battery cover on the back. Remove the old
batteries and dispose of properly. Replace with four new LR41 batteries as shown. Do not mix old and
new batteries or mix batteries.
Storage: Remove batteries before storing the alarm for extended periods of time to prevent batteries
from corroding and damaging the Personal Alarm.
Caution: Batteries may leak harmful liquids or ignitable materials or explode causing injury and product
damage.
Do not mix old and new or other battery types.
Replace all batteries at the same time.
Replace fully discharged batteries immediately