Kenmore 79095727990 electric range

User Manual - Page 5

For 79095727990.

PDF File Manual, 19 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Control Pad Functions
CLEAR PAD-- Used to
clear any function
previously entered
except the time of day
and minute timer. Push
CLEAR to stop cooking.
BAKE PAD--Used to
enter the normal
baking mode _
temperature.
BROIL PAD--
Used to select_
the variable
broil function.
CLEAN PAET--
Used to selectthe
self-cleaning
cycle.
READ THE INSTRUCTIONS CAREFULLYBEFOREUSING THE OVEN. For
satisfactory useof your oven, become familiar with the various functions of
the oven as described below.
UP and DOWN ARROW PADS-- Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic
stop time), time of day, clean time and minute timer.
CLOCK PAD-- Used
_=time of
day.
FEATURE
LIGHTS-- These
light to show which
feature is in use.
OVEN, PREHEAT & LOCK LIGHTS--The "OVEN" light
will glow each time the oven unit turns on to maintain
the set oven temperature. The "PREHEAI" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "LOCK light will flash until the door
locks when the self-clean cycle is in use. It glows
constantly after the door locks.
TIMER PAD_
Used to set or
canceltheminute
timer. The minute
timer does not
sta_ orstop
cooking.
BAKE TIME PAD--
Used to enter the
length of the
baking time.
-STOP TIME PAD--
Used to set the I'rl
desired stop time Z
for baking. Can be
used with BAKE _1"
TIME to program a
-r"
delayed bake cycle.
The oven can be programmed to:
Bake normally
Time bake
Broil
Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad ispushed. If desired, the controlscan be
programmed for silent operation. Pushand hold []. After 7 seconds,the control will beep once. Thiswill block the
controls from sounding when a pad is pushed. To return the sound, push and hold _J
again
for 7
seconds until 1
beep is heard.
Note: The control will return to the audible mode after a power outage,
Temperature conversion:
The electronic oven control isset to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push _. " " appears in the display.
2. Push and hold the _ until "HP'appears in the display,
3. Push and hold _ until °F or °C appears in the display.
4. Push the _ or _ to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
5
Loading ...
Loading ...
Loading ...