Loading ...
Loading ...
Loading ...
How to Set the Alarm
Access the alarm setting either through the main menu or by pressing the alarm button
on the remote.
1. Alarm 1 is shown first. Use the Alarm and Select buttons to choose between Alarm 1
and Alarm 2. Note: At any point you can navigate through the alarm menu by using
the Back or t buttons, and the Select or u buttons.
2. Use the pq and Select buttons to set the alarm on or off. If the time and date are not
set, the PAL
+BT
will prompt you to set the Time/Date first.
3. Use the pq buttons to set/change the hour, then press Select. Repeat this process to set/
change the minutes, followed by AM/PM (if time is set to 12 hour format), then press Select.
4. Use the pq buttons to select how long you want the alarm to sound, then press Select.
5. Use the pq buttons to select the source you wish to wake to, then press Select. If you
set the source to DAB (includes DAB
+
/DMB) or FM, use the pq buttons to select the
station preset or last listened, then press Select. If the alarm source is set to DAB and
the last listened or preset station is unavailable at the time the alarm sounds, the alarm
will default to the tone.
6. Use the pq buttons to set how often the alarm should be set to wake, then press Select.
If “Once” is selected, you must set the date you wish the one time alarm to sound.
7. Lastly, use the pq buttons to set the volume level of the alarm, then press Select.
8. Repeat this process for Alarm 2 if desired.
If you make a mistake at any point in the process, press the Back button on the remote
and begin again.
Your settings will not be saved unless you complete the entire process and the display shows
“Alarm Saved”.
IMPORTANT NOTES:
• The alarm cannot sound if the PAL
+BT
is off and not connected to the external adapter.
• The alarm volume will ramp-up over time. It will take several seconds until the alarm
reaches the volume level set in the alarm menu.
• Should power be lost or the battery becomes discharged, the alarm time will be
saved, but the alarm cannot sound without power to the PAL
+BT
.
ALARM OPTIONS:
Alarm Quick Set: With the PAL
+BT
in standby, repeatedly press the alarm button briefly
to toggle each alarm on or off.
13 – ENGLISH
Loading ...
Loading ...
Loading ...