Loading ...
Loading ...
Loading ...
5
MACHINE MAINTENANCE
To keep the machine performing well
for many years, please follow the
following maintenance procedures.
!!! Always confirm that the machine
is unplugged prior to performing
any maintenance or repairs!!!
DAILY MAINTENANCE
1) When cleaning operation is complete
for the day, drain and rinse the
recovery tank thoroughly with clean
water.
2) Remove remaining solution from
solution tank.
3) Remove vacuum filter and rinse with
clean water.
4) Replace filter when dry.
5) Remove and inspect spray jet. If
necessary, clean jet.
NOTE: Do not clean jet with a pointed
object, as it will damage the jets.
6) Check brush strip & remove any debris
or carpet fibers.
7) Check pick up head on hand tool and
remove any debris or carpet fibers.
8) Clean machine with a nonabrasive cleaner.
9) Inspect power cable for any damage.
Replace if necessary.
MONTHLY MAINTENANCE
1) Flush pump & plumbing with an acetic acid
solution to dissolve any chemical buildup.
Mixing Instructions:
a) Premix 8 oz. of an acetic acid solution
with 1 gallon of water and pour into
solution tank.
b) Turn vacuum / pump switch on
c) Put floor tool head over floor drain and
pull solution trigger for one (1) minute.
d) Turn machine off and allow remaining
solution to sit in machine overnight.
e) The following day, spray out remaining
solution and flush system again with 1
gallon of clean water.
2) Inspect machine for water leaks.
3) Check machine for loose or missing nuts,
screw and bolts and replace as necessary.
MACHINE STORAGE
1) Prior to storing the machine, ensure the
solution and recovery tanks are clean and
empty of any solution.
2) Store machine in upright position in a dry area,
with the vacuum hose removed for air
circulation.
NOTE: If you are storing the machine in an area
which can freeze, be sure both tanks and the
solution plumbing are empty of all water and dry!
Loading ...
Loading ...
Loading ...