Loading ...
Loading ...
Loading ...
INSTALLATION – CONTROLLERS
65
BATHROOM1 AND BATHROOM2 CONTROLLERS
If only one Bathroom controller is to be installed, the standard Bathroom1 Controller (Rheem AU -
Part 299854, NZ - Part A299851) or the Bathroom1 Deluxe controller (Rheem AU - Part 299862, NZ -
Part A299862) must be used. If two Bathroom controllers are to be installed, one must be a standard
Bathroom1 controller and the other must be a standard Bathroom2 controller (Rheem AU - Part 299855, NZ -
Part A299852) or one must be a Bathroom1 Deluxe controller and the other must be a Bathroom2 Deluxe
controller (Rheem AU - Part 299863, NZ - Part A299863).
They have a minimum temperature setting of 37°C and a maximum temperature setting of:
871 series 50°C
875 series 48°C
The method of installation for the standard Bathroom1 and Bathroom2 controllers and the Bathroom1 Deluxe
and Bathroom2 Deluxe controllers is identical.
Choose a suitable location for each Bathroom controller, away from water, heat, and sunlight. The Bathroom
controllers are supplied with a 250 mm length of wire with connectors to mate with the Bathroom controller
cable.
Notes:
It is not recommended to have exposed wiring in a bathroom.
Do not apply sealant to the controller cable.
Bathroom1 and Bathroom2 Controller Components
Bathroom1 Deluxe and Bathroom2 Deluxe Controller Components
screw x 2
controller screw
base plate
foam packing
Bathroom controller (standard)
screw x 2
controller screw
base plate
foam packing
Bathroom Deluxe controller
Loading ...
Loading ...
Loading ...