Loading ...
Loading ...
Loading ...
Installation
55
EN
4. Screw the extension pipe assembly C
to the gas connector D of the
appliance, placing the seal provided 2
between them.
5. Apply insulating material to the thread
of the extension pipe assembly C, then
tighten the hose E.
Adaptation to different types of gas
In case of operation with other types of gas,
the burner nozzles must be changed and
the minimum flame adjusted on the gas
valves.
Replacing nozzles
1. Remove the pan stands, burner caps
and flame-spreader crowns to access
the burner casings.
2. Replace the nozzles using a 7 mm
spanner according to the gas to be
used (see “Burner and nozzle
characteristics table”).
3. Replace the burners in the correct
position.
1. Inner nozzle
2. Outer nozzle
Loading ...
Loading ...
Loading ...