Loading ...
Loading ...
Loading ...
Loosenthecenterhexboltandlowerthebladeand
enginepulleyuntilthereisadequateclearanceto
movethebeltpastthebeltkeeper.
Removethebeltfromtheenginepulleyandaround
theblade.SeeFigure14.
Reassembleinreverseorderwithnewbelt(part#
754-0465).NOTE:Beginidlerreassemblyby
insertingboltupthroughtheidlerbrackethole.
Adjustthedriveclutchfollowinginstructionson
page14.
Drive Belt
NOTE: The wheels have
been moved forward in
this picture for clarity.
Do not remove the
wheels away from the
mower housing while
doing the job.
Bel
Keeper" Lock Nut
/
Front Drive Cover
Right Front Left Front
1eel
Engine
Pulley
Hex Bolt
Remove
from around
pulley and blade
Figure 14
Idler
Shoulder
Screw
Figure 13
AdjustingDriveClutch Control
The drive clutch adjustment wheel is located on the
drive clutch control handle housing and is used to
tighten or loosen tension on the drive cable.
Perform this adjustment if the following exists.
a. The mower does not propel itself with the
drive clutch engaged.
b. The mower's drive wheels hesitate with the
drive clutch engaged.
To resolve the above problems, rotate the
adjustment wheel with your fingers: clockwise to
tighten the cable, and counter-clockwise to loosen
the cable. See Figure 15 .
TO
cable
Adjustment
Wheel
To loosen
cable
Figure 15
14
Loading ...
Loading ...
Loading ...