Loading ...
Loading ...
Loading ...
INSTALLATION
STEP 6: ATTACH THE OVEN TO THE WALL
CAUTION
To avoid risk of personal injury or property damage, you will need two people to install this microwave oven.
1. Carefully lift microwave oven and hang it on support tabs
(See Figure 26 at the bottom of the mounting plate.) Reaching
through upper cabinet, thread power supply cord through the
power supply cord hole in the bottom of the upper cabinet. See
Figure 30.
2. Rotate the microwave oven upward so the top of oven is against
the bottom of the upper cabinet or cabinet frame.
3. Drop the lock pin and washer assembly into hole N (left side
hole) and push the pin down as far as it will go.
See Figure 31.
"[ _ power cord
Figure 30
4. Place washers over two 1/4"x3" bolts. Then insert a bolt down
through each hole in the upper cabinet bottom.
Tighten the bolts until the gap between the upper cabinet and
microwave oven is closed. See Figure 32.
j_f
Figure 31
5. Remove the lock pin and washer.
If wall-vented or room-vented installation is used, skip to
No. 6, 7.
Figure 32
- 20 -
Loading ...
Loading ...
Loading ...